灌注用環氧樹脂

萬聯灌注用環氧樹脂,具有優良的電性及機械作業性,它被使用在電器、馳返變壓器,半導體、汽車電裝品、馬達等之灌注,深獲好評。

項目ITEM(at 25°C)WK-400A/H
WK-571A/H
WK-573A/H
WK-921A/H
WK-571A/579H
WK-969A/H
WK-838A/B
適用性AVAILABILITYCapacitor,Noise,Filters,Motor,Automobile,Flyback Transtormors,Printed Wiring boards.Cable joints,Diode.Capacitor,Noise,Filters,Motor,Automobile,Flyback Transtormors,Printed Wiring boards.Cable joints,Diode.Capacitor,Noise,Filters,Motor,Automobile,Flyback Transtormors,Printed Wiring boards.Cable joints,Diode.Capacitor,Noise,Filters,Motor,Automobile,Flyback Transtormors,Printed Wiring boards.Cable joints,Diode.Capacitor,Noise,Filters,Motor,Automobile,Flyback Transtormors,Printed Wiring boards.Cable joints,Diode.Capacitor,Noise,Filters,Motor,Automobile,Flyback Transtormors,Printed Wiring boards.Cable joints,Diode.Capacitor,Noise,Filters,Motor,Automobile,Flyback Transtormors,Printed Wiring boards.Cable joints,Diode.
混合重量比Mixing Ratio (by weight)100 / 50
100 / 30
100 / 50
100 / 50
100 / 25
100 / 30
100 / 60
比重Specific Gravity MixtureA : 1.05
H : 1.00
A : 1.02
H : 0.97
A : 1.05
H : 1.05
A : 1.6
H : 1.6
A : 1.74
H : 1.05
A : 1.82
H : 1.20
A : 1.05
B : 0.95
硬化時間Cured Condition °C/hrs
25℃ / 12 Hours.

“25℃ / 15 Hours
60 – 70℃ / 20mins”

25℃ / 6 Hours

25℃ / 12 Hour

25℃ / 8 Hours

75℃ / 2.5 Hours.

80℃ / 30 mins.
可用時間Available time25℃ / 15 mins
25℃ / 3 – 4 Hour
25℃ / 40 mins
25℃ / 30 mins
25℃ / 1 Hour
25℃ / 8 Hour
25℃ / 6 Hours.
硬度Hardness shore D91
828888919250-70
熱變形溫度Heat Distortion Temperature °C100
85110105100110
吸水率Water Absorption % (100 °C/4 hrs)
<0.1<0.1<0.10.17
0.11 < 0.1
介電常數Dielectric Constant 1 KHz3.83.84443.73.9
介電損失Dissipation Facyor 1KHz %





0.6

破壞電壓Dielectric Bd Strength KV/mm22
22
體機電阻Volume Resistivity ohm.cm>10¹⁶>10¹⁶>10¹⁶>10¹⁶>10¹⁶>10¹⁵>10¹⁴
耐燃性Flame Resistance UL-94 (File No . E87252)
UL94V-0